Mac'Ants Group | Design & Manufacture of Surface Prep Equip

It might have the lowest price in our range, but the specification is anything but basic.

This is an adaption of the standard suction blast cabinet, this particular system was a set of 3 systems built for BAE Systems. Running on fine White Fused Aluminas the need for the cyclone media separator is clearly an advantage to help maintain the use of the fine media in the system and avoid its carry over directly to the dust extractor.

This is a single nozzle automatic tumble blast system, click on the tool bar for more range details.

This is one of a 3 cabinet order supplied for processing aerospace rivets. This model had 4 independantly activated nozzles. For more range details click the tool bar.

Although its only 750mm wide , this system is packed with features from its bigger brother.

Built to do a days work repeatedly, full of feature and effective! For more range details follow the tool bar.

For a precise finish and a high work rate these systems offer repeat performance time and time again. Designed for the heavy duty end of industrial work, they can operate with almost any blast media (when options are specified).

Specifically designed to work with plastic media, these systems offer ultimate control, blasting pressures can be controlled down to 5 psi if needed!

From a 10" pot to a 24" wheeled system or even a trailer mounted bulk blast machine, they're all available. Add a wetblast head and supress the onsite dust associated with open nozzle blasting. For range details follow the links on the tool bar to the left

This is a free standing system normally associated with blast cabinets, 1000cfm and 12" water pressure as standard, these reverse pulse cleaning systems can be used for a variety of workshop applications.

This is a picture of a pair of hi vacuum 5000 cfm site dust extractors supplied and used on an 8 wheel centre fed shotblast machine. With a bulk dust chamber dumping facility this was a bespoke adaptation. These systems rane from 1000 cfm, all the way up to 40,000 cfm units.

This is one of a pair of units supplied to a contractor to permit either use in their own blastrooms or to be able to take to site and extract dust from a temporary chamber at the dock yard. 10,000 cfm with 12" pressure. Similar systems available for short term hire.

This is a 20' overall blast room , with a 12' blast chamber and 8' plant room. Complete with 5000 cfm dust extractor, blast machine and media recovery, rubber lined and internal lights - Plug n Play!! Similar units available for hire. See the full range details by following the left hand tool bar on this page

Can't fit a new blast room in to your workspace, then we could build one on site, or build one with a specific dimension for your component. This system was built in sections in a paint manufacturing facility, full Zone 1 electricals, full media recovery floor - The works!!

The new Avialite Auriga System under manufacturing trials in late 2007. In essence its a full plastic media stripping facility on the move, and a bit more besides.......

For rapid processing of smaller parts that can stand being tumbled. Media is propelled at the components with an impellor wheel system. Uses metal shot media ONLY

MacVac Air Recovery units are designed to provide effieicent recovery of media over a maximum of 50mtr, this system has the ability to self clean to maintain an optimum vacuum. Larger vacuum and airflow electricalsystems are available.

If you're blasting outside then you'll need to recover and potentially re use media, this is a samller vacuum recovery unit but with a 3 MT (garnet) bulk storage hopper.

Sometimes it's just handy to have some media over the blast pot, this system works with a vacuum generator to lift media over the pots ready for semi continuous work flow.

For localised or spot blasting, for instance blasting a component mounted on a lathe these systems are ideal.

If you need something a little bit different or a modification to en existing system, get in touch. This was an adaption to a clients existing cabinet and provided a hi vacuum extractor and large blast pot and over pot storage / reclassification.

This was an overhaul of 4 part exchnaged systems. The stock is always changing, call for details of current stock. Or have your old system overhauled or part exhange it with us for a new system complete with a 12 month warranty.

Blast Nozzles, hoses, couplings, visors, breahting filters, blast helmets - you name it we have it! Keep an eye on the online catalogue......